Contact Person
Laser Cutting Technique
Mrs. Coren BÖTTGER
phone
49 3531 500-226
email
lasercutting@kjellberg.de
Laser cutting system | XFocus 2001 |
Laser power | 2000 W |
Wave length | 1070 nm |
Mains connection | 3~ 400 - 460 V ±10 % + PE 50/60 Hz |
Max. connected load at 100% duty cycle | 8 kVA |
Cutting range* Mild steel Stainless steel Aluminium Copper Brass |
0.5 - 15 mm 0.3 - 8 mm 0.3 - 8 mm 0.5 - 4 mm 0.3 - 5 mm |
Gas supply | O2, N2, Air |
Dimension (L x W x H) | 1060 x 690 x 1710 mm |
Mass |
320 kg |
![]() Cooling unit |
|
Mains connection Max. connected load |
3~ 400 V ±10% + PE, 50 Hz or 3~ 460 V ±10% + PE, 60Hz 7 kVA (50 Hz) or 9 kVA (60 Hz) |
Dimensions (L x W x H) | 630 x 815 x 1360 mm |
Mass without water filling with water filling |
340 kg 460 kg |
![]() Laser cutting head |
|
Cutting gas connection | Ø 10 mm, max. 25 bar |
Gases | O2 (25 bar), N2 (25 bar), air (25 bar) |
Water cooling | max. 5 bar flow rate min. 1.5 l/min |
Air humidity | 30 - 95 % (non-condensing) |
Temperature | 5 - 55 °C |
Storage temperature | -25 to +55 °C (without water) |
External acceleration | max. 45 m/s² |
Weight | approx. 6 kg |
*All mentioned cutting and piercing thicknesses depend on the material as well as the cutting technology and the guiding system. The operator has to observe national and local regulations which apply for the use of lasers.