Contact person
Plasma Cutting Technique
Mrs. Coren BÖTTGER
phone
+49 3531 500-226
email
plasmacutting@kjellberg.de
Power source | Q 3000 / Q 3000 plus |
Mains voltage* | 3x 400 V, 50 Hz |
Cutting current (at 100 % duty cycle) | 5 - 300 A |
Marking current (at 100 % duty cycle) | 5 - 50 A |
Cutting range | 0.5 - 80 mm |
Piercing | up to 50 mm |
Dimensions (L x W x H) | 1100 x 690 x 1430 mm |
Weight | 297 / 317 kg |
Plasma torch | Q-Torch |
Operator interface | Q-Desk web-based, platform independent |
*Other voltages and frequencies available upon request.
Q-Hole
Precise holes in mild steel with a diameter to material thickness ratio of 0.75:1 (Diameter:material thickness) | more...
Q-Mark/Q-Notch
Excellent marking and notching quality
Contour Cut
Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness) | more...
Contour Cut Speed
Contour cutting in mild steel with similar quality and up to 50% higher speed | more...
Silent Cut
Cutting of mild steel with reduced sound pressure level | more...
HiFinox
Dross-free cutting of stainless steel in the range between 1 and 6 mm
Ar/H2 Mix
Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm